Perfecta BB Air Board System

The Perfecta BB automatically detstacks reams and the automatic transport moves stock towards the high-speed cutter. The rear-loading table load the high-speed cutter via the rear table. The destacked reams are transported towards the cutter by either pushing unit "BTE" or by a gripper transport system "BFS". When front-table loading is desired, the destacked ream is transported semi-automatically towards the cutter either by the pusher or manually by the operator.

• Possible destacking systems
  • Reflective wedge (destacking exactly the pre-defined ream)
  • Long separating strips (E-System, destacking exactly the predefined ream is not possible)
  • Short separating strips (destacking exactly the pre-defined ream)
  • Light-barrier, which is adjusted to the requested ream height (destacking roughly the requested ream, destacking of exactly the pre-defined ream is not possible)
• Installation
  • Longitudinal installation (the loader takes up the ream at its smaller side)
  • Installation at an right angle (the loader takes up the ream at its larger side)
• Loaders for formats 8 and 10 are constructed with a double-support
• Applications
  • Paper
  • Plastic
  • Chipboard or heavy cardboard
  • Printing plates
• Advantages
  • Very high automation level
  • All relevant parameters can be adjusted to suit the product from the operator's panel
  • Solid and precise construction
  • Automatic destacking of small formats is possible
  • Universal application