Formax FD 8502 Series Office Shredder

The Formax FD 8502 Series Office Shredder is built to the highest standards for operator convenience, safety and reliability. Available in Standard Feed (FD 8502CC) and AutoFeed (FD 8502AF) configurations, each cross-cut model features an easy-to-use LED control panel which puts commercial-grade power right at your fingertips.

The Standard Feed model shreds 23-25 sheets at a time, up to 35 feet per minute, with a shred size of 5/32" x 1 1/5". The AutoFeed model accepts stacks of paper for hands-free shredding with a 22-24 sheet capacity.

Heat-treated steel blades, a steel cabinet, lifetime guaranteed waste bin, and a powerful AC geared-motor ensure years of reliable performance and information security in your office environment. The ECO Mode saves energy by automatically switching into standby mode after 5 minutes of inactivity. The optional EvenFlow™ Automatic Oiling System periodically lubricates the cutting blades based on motor run time.

Specifications

Standard Feed or AutoFeed

The FD 8502 Series comes in two configurations. Both are P-4 cross-cut shredders with a 5/32 in x 1-1/5 in shred size.

• FD 8502CC Standard Feed: the operator feeds 23-25 sheets at a time. The bin holds 33 gal.
• FD 8502AF AutoFeed: the operator loads a stack of paper and the shredder feeds it automatically. It has a 22-24 sheet capacity and a 26 gal bin.

Choose the AutoFeed if your staff load full stacks and do not want to feed each batch by hand. For a 16 in feed opening, see the Formax FD 8602CC. For a 53 gal bin and automatic oiling, see the Formax FD 8652CC.

Compare every model on the cross-cut paper shredders page. See all Formax equipment from Mid-State Litho.

Delivery, service and financing

Mid-State Litho is a Michigan-based authorized Formax dealer. Formax ships the FD 8502 Series direct to you by truck freight. Mid-State Litho can confirm the delivery details before it ships.

For setup and service questions, see service and support. To pay in monthly amounts, see financing and leasing. For a question about either model, use the contact page.

Frequently asked questions

What is the difference between the FD 8502CC and the FD 8502AF?

The FD 8502CC is the Standard Feed model. The FD 8502AF AutoFeed accepts stacks of paper and feeds them automatically.

How many sheets does the FD 8502 Series take?

The FD 8502CC takes 23-25 sheets at a time. The FD 8502AF has a 22-24 sheet capacity.

What security level is the FD 8502 Series?

Both models are P-4 cross-cut shredders. The shred size is 5/32 in x 1-1/5 in.

Does the FD 8502 Series oil its own blades?

The EvenFlow automatic oiling system is an option. It adds oil to the cutting blades at intervals that the motor run time controls.

How does the FD 8502 Series ship?

Formax ships it direct to you by truck freight. Mid-State Litho can confirm the delivery details before it ships.