James Burn Plastic-Spiral Oval Punch Die - 52 Holes (4x5mm), Docupunch Plus
James Burn plastic-spiral punch die: 52 oval holes (4x5mm), 10 retractable pins, for the Docupunch Plus. Genuine JBI tooling from Mid-State Litho.
Ask a Question
Specs, compatibility, install, supplies—ask anything. A finishing specialist will reply quickly.
Details & specifications
The James Burn plastic-spiral punch die is interchangeable tooling for the James Burn automatic punch line, configured here for the Docupunch Plus. It punches a 52-hole oval pattern at 4x5mm on a .2475 inch (6.2865 mm) pitch, the spacing used for plastic-spiral (coil) binding, and carries 10 retractable pins so you can punch A4, A5, and Letter sheets cleanly with a 2.5mm edge margin and no partial holes at the ends. Because the Docupunch Plus takes interchangeable dies, a shop switches between hole patterns by changing the tool rather than buying a separate machine for each binding style.
Plastic-spiral tooling is the choice for coil and spiral binding work, where the oval hole pattern lets the spiral thread through evenly along the sheet. Mid-State Litho is an authorized James Burn International dealer that supplies, installs, and services the automatic punch line and the coil binding tooling and supplies that run on it.
James Burn International Tooling and Cross-Sell
This die is one tool in the James Burn interchangeable-tooling system. MSL carries a broad set of James Burn punch dies, 2:1 and 3:1, round and square hole, and plastic-spiral, in several hole counts and pitches, so a shop can match the die to the binding element. A Docupunch Plus companion die is the 3:1 square-hole 39-hole die for twin-loop wire. Explore the full range through our mechanical binding and coil binding categories.
Why Buy from Mid-State Litho
Mid-State Litho is an authorized James Burn International dealer, family-owned and Michigan-based, serving the Great Lakes since 1984. We supply genuine James Burn tooling, support the machines that run it, and our team helps match the right die to your binding style and page count. Financing and leasing is available, and our service and support team keeps your bindery running. Questions about fit or lead time? Contact us.
Plastic-Spiral Punch Die FAQ
What machine does this punch die fit?
The James Burn Docupunch Plus automatic punch, which uses interchangeable dies.
What is the hole pattern?
52 oval holes at 4x5mm on a .2475 inch (6.2865 mm) pitch, the spacing for plastic-spiral (coil) binding.
What do the 10 retractable pins do?
They let you pull pins to punch shorter sheets or different sizes without leaving partial holes at the margins.
What sheet sizes does it support?
A4, A5, and Letter, with a 2.5mm edge margin.
Is this genuine James Burn tooling, and does MSL support it?
Yes. It is genuine James Burn International tooling (part M99085), built to order and supported by Mid-State Litho, an authorized JBI dealer.
We deliver it, install it, train your team and keep it running.
This is not a drop-ship. Our factory-trained technicians install on site, train your operators, and back it with same-day and next-day service across Michigan and the Great Lakes.
Install & train
On-site setup and operator training included.
Same / next-day service
Fast response across the Great Lakes.
Precision machining
Replacement parts fabricated in-house.
Financing
Lease and purchase options available.