Formax Cut-True 31H Hydraulic Guillotine Paper Cutter

Formax Cut-True 31H Hydraulic Guillotine Paper Cutter

The Formax Cut-True 31H is the second-largest cutter in the Cut-True line. It is a 28.7-inch hydraulic guillotine paper cutter for high-volume print finishing shops. It handles full 28-inch press sheets, so these shops do not need to step up to the flagship 33H. The 31H has a hydraulic clamp and a hydraulic knife drive with an air-assisted ball deck. A 10-inch color touchscreen stores up to 100 programmable cut jobs. The cutter also has an automatic back gauge, an LED laser cutting line, and an infrared safety curtain with dual-button operation.

These are the same production-grade controls that much more expensive industrial cutters use. The 31H puts them in a footprint that print shops can fit on a finishing floor.

Mid-State Litho is an authorized Formax dealer for Michigan and the Great Lakes region. We are a second-generation, family-run print finishing equipment integrator, in business since 1984. We sell, install, train, and service the full Formax Cut-True ladder. It includes the manual 13M / 15M / 16M, the electric 23S / 27S / 28A / 29A, and the hydraulic 29H / 31H / 33H. Financing and leasing are available on the Cut-True 31H.

The 31H is for shops that have outgrown a 20-inch hydraulic cutter (the 29H) but do not need the 31.5-inch, 4-inch-clamp capacity of the 33H flagship. Call 1-800-343-4231 to find out if the 31H is the right step up from a Cut-True 29H. We can also help you decide if a shop that runs near 28-inch sheets daily needs the 33H.

Key features

• 28.7" cutting width for large-format sheet handling
• Hydraulic clamp and blade system for consistent production performance
• Air-assisted ball deck for easy movement of heavy paper stacks
• LED laser cutting line for precise alignment
• 10" color touchscreen with up to 100 programmable jobs
• Automatic back gauge with high-speed positioning
• Foot pedal pre-clamp for alignment before cutting
• Infrared safety curtain and dual-button operation
• Heavy-duty construction for true two-shift operation

Product overview

The Cut-True 31H is made for high-output print shops. It handles larger sheet sizes and heavier workloads than standard cutters. Its hydraulic drive system gives consistent cutting force. The air-assisted ball deck significantly reduces operator effort with large stacks.

The 31H has programmable jobs, automatic back gauge positioning, LED laser alignment, and fine-tuning controls. These features make it a strong machine for shops that focus on efficiency, accuracy, and throughput.

Specifications

Benefits

• Handles larger sheet sizes and heavier workloads
• Reduces operator fatigue with air-assisted movement
• Improves cutting accuracy and repeatability
• Supports high-volume production workflows
• Delivers long-term durability and performance

Why the Cut-True 31H

The Cut-True 31H is built for operations that need more than standard cutting capacity. It combines hydraulic power, large-format capability, and workflow features. This makes it a strong choice for high-volume print shops that need efficiency, precision, and durability.

Authorized Formax dealer since 1984

Mid-State Litho is an authorized Formax Cut-True dealer based in Michigan. We serve the Great Lakes area and ship across the continental US. We carry the full Formax Cut-True ladder, from the Cut-True 13M tabletop manual cutter through the Cut-True 33H production hydraulic flagship.

What that means for a Cut-True 31H buyer:

• Pre-sale capacity sizing. Talk through 28-inch press sheet workflow, clamp-pressure requirements, and step-up cost vs the Cut-True 29H and the Cut-True 33H before you commit.
• Installation and operator training. Factory-spec install, calibration, and operator training on the 100-job touchscreen and back gauge so the 31H produces on day one.
• Blade replacement and consumables. Stocked at Mid-State Litho, no waiting on factory direct. See service and support.
• Financing and leasing. The financing application takes about five minutes. Decisions typically come in 24 to 48 hours.
• Family-run, second generation, operating since 1984. Read more about Mid-State Litho. You can call the owner.

Call 1-800-343-4231 or use the Request a Quote form below.

How to choose a Formax Cut-True paper cutter

The Cut-True line covers four product tiers, manual, electric, programmable-electric, and hydraulic. Pick by cut width, sheet volume, and clamp drive.

If you run 28-inch press sheets daily, the 31H is the smallest cutter in the Cut-True line that can handle them. The 29H tops out at 20.5 in and forces sheet reduction or a slip-sheet pass. If you run 31-inch press sheets, step up to the 33H.

See the full Formax brand page for accessories and consumables, or the hydraulic guillotine paper cutter category for cross-brand comparison with Challenge, Triumph, and Perfecta.

Frequently asked questions about the Formax Cut-True 31H

What is the actual cut width of the Cut-True 31H?

The Formax Cut-True 31H has a 28.7-inch maximum cut width. The '31H' is a model designation, not a cut-width measurement. If you need to cut sheets wider than 28.7 inches, step up to the Cut-True 33H. It has a 31.5-inch cut width and a deeper 4-inch clamp opening.

How is the 31H different from the Cut-True 29H?

Same hydraulic clamp and knife drive, larger sheet capacity. The Cut-True 29H cuts 20.5 inches. The 31H cuts 28.7 inches. Print shops that run 28-inch press sheets cannot finish them on a 29H without a slip-sheet pass.

Is the Cut-True 31H programmable?

Yes. The 31H has a 10-inch color touchscreen that stores up to 100 programmable cut jobs with automatic back gauge positioning. It also has an LED laser cutting line for sheet alignment and a foot-pedal pre-clamp for one-handed setup.

Does the Cut-True 31H need a dedicated electrical or air supply?

The 31H requires standard three-phase shop power and an air-line connection for the air-assisted ball deck. Mid-State Litho confirms site requirements at quote and during pre-install survey. Call 1-800-343-4231 for the spec sheet.

Can the Cut-True 31H be financed or leased?

Yes. Mid-State Litho offers financing and leasing on the Cut-True 31H and the rest of the Formax Cut-True ladder. The application is short (about five minutes) and decisions typically come back in 24 to 48 hours. Start at the financing page or call 1-800-343-4231.