Formax Cut-True 29H Hydraulic Guillotine Paper Cutter
Formax Cut-True 29H 29″ hydraulic-clamp guillotine paper cutter. Sold & serviced by Mid-State Litho, authorized Formax dealer, in-house knife sharpening.
Freight items can be purchased online; final delivery details may be confirmed before shipment.
Tax-exempt? Apply once, check out tax-freeAsk a Question
Specs, compatibility, install, supplies—ask anything. A finishing specialist will reply quickly.
Downloads
Details & specifications
Formax Cut-True 29H Hydraulic Guillotine Paper Cutter
The Formax Cut-True 29H is a production-grade hydraulic guillotine cutter designed for print shops, in-plants, and finishing departments that need higher clamp force, dependable repeatability, and true shift-ready performance. With a 20.5” cutting width, 7” full-color touchscreen, hydraulic clamp and blade control, and the ability to store up to 100 jobs with up to 100 steps each, the 29H is built for demanding cutting environments.
Key Features
- Hydraulically controlled clamp and blade for strong, consistent cutting performance
- True two-shift operation for higher-volume production environments
- 20.5” cutting width for larger sheets and demanding finishing applications
- 7” full-color touchscreen for programming jobs and simplifying setup
- Up to 100 programmable jobs, with up to 100 steps each, for repeat work and fast recalls
- Fully programmable back gauge for accurate, repeatable cut positioning
- Infrared light beam safety curtain that stops operation when interrupted
- Two-hand operation for safer cutting activation
- Foot pedal pre-clamp to hold stock in place and check alignment prior to cutting
- Hydraulic pressure gauge for monitoring clamp pressure during operation
Product Overview
The Cut-True 29H is designed for shops that need more than a standard electric cutter. Its hydraulic cutting system, programmable controls, and production-focused design make it an excellent fit for operations handling repeat jobs, larger sheet sizes, and more demanding daily workloads.
With features like a hardened steel blade, solid steel blade carrier, LED cutting line, fine-tuning knob, low-friction work table, and included blade change safety tool kit, the 29H combines precision and durability in a compact hydraulic cutter format.
An industrial guillotine paper cutter built for production
The Cut-True 29H is an industrial paper cutter built for pressrooms, binderies, and in-plant finishing departments that run cutting as a daily production task. Its hydraulic clamp and blade drive deliver the steady clamp force a high-volume guillotine paper cutter needs to hold heavier lifts square, cut after cut, across a full two-shift day.
Where a lighter electric cutter suits occasional trimming, this production guillotine paper cutter pairs a 20.5" cut width, a fully programmable back gauge, and 100-job memory so operators can recall repeat work and keep throughput steady. It is the industrial guillotine cutter for shops trimming booklets, brochures, and offset or digital stock in volume. See the full Formax finishing equipment line.
Specifications
| Cutting Action | Dual-button hydraulic |
| Maximum Cutting Width | 20.5” (520mm) |
| Maximum Paper Stack Height | 3.15” (80mm) |
| Programmable Jobs | Up to 100 jobs, up to 100 cuts each |
| Control Panel | 7” full-color touchscreen |
| Length Behind Blade | 20.5” (520mm) |
| Length in Front of Blade | 18.25” (464mm) |
| Table Size in Front of Blade | 32” W x 37” D |
| Table Size | 30.75” W x 15.75” D, 56” W x 15.75” D with side tables |
| Clamp Style | Automatic, hydraulic |
| Hydraulic Clamp Pressure | 700 - 4,500 psi |
| Back Gauge Adjustment | Fully programmable using screen |
| Dimensions | 49.25” H x 31” W x 53.25” D |
| Dimensions with Optional Side Tables | 49.25” H x 61.5” W x 53.25” D |
| Weight | 1,014 lbs |
| Power Supply | 220V, 60Hz, 20A dedicated line, NEMA 6-20P |
Applications
- Commercial print finishing
- Higher-volume cutting environments
- Booklets, brochures, and invitations
- Digital and offset print trimming
- In-plant finishing departments
- Production print workflows requiring hydraulic clamp force
Available Options and Supplies
- Wide Side Tables (Pair)
- 29-10 Replacement Blade
- 29-20 Cutting Sticks, package of 8
Benefits
- Provides stronger clamp pressure for more demanding cutting jobs
- Supports repeat work with programmable job memory and touchscreen control
- Helps improve consistency and throughput in production settings
- Enhances operator safety with infrared curtain and two-hand activation
- Offers a compact hydraulic cutter system for shops stepping up from electric models
Why the Cut-True 29H
The Formax Cut-True 29H is ideal for shops that need the next step up from a standard electric cutter. Its hydraulic cutting system, production-oriented durability, programmable controls, and higher clamp pressure make it a strong choice for demanding print and finishing environments that need reliable, repeatable results day after day.
Where the 29H fits in the Cut-True line
The Cut-True family scales from a manual tabletop model up to wide-format hydraulic production cutters, so you can match clamp type and cut width to your daily volume:
- Cut-True 29A ($18,995) - the same 29-inch class with an electric clamp, the lower-cost step below the 29H.
- Cut-True 29H ($24,995) - the hydraulic-clamp guillotine on this page; hydraulic holds heavier lifts more consistently for production trimming.
- Cut-True 31H ($35,145) - the larger 31-inch hydraulic cutter for wider sheets.
Choose the 29A when budget leads and lifts are light; choose the 29H hydraulic paper cutter for consistent clamp force on heavier production runs; step to the 31H when sheet width exceeds the 29-inch class. See all hydraulic guillotine paper cutters and the full Formax finishing equipment line.
Cut-True 29H vs 29A: which 29-inch Formax cutter?
Both are 29-inch-class Formax guillotine cutters with programmable controls. The difference is clamp type and price: the 29H uses a hydraulic clamp for consistent force on heavier production lifts, while the 29A uses an electric clamp at a lower entry price.
| Cut-True 29H (this page) | Cut-True 29A | |
| Clamp type | Hydraulic clamp | Electric clamp |
| Price | $24,995 | $18,995 |
| Class / cut width | 29-inch class, 20.5" cut | 29-inch class |
| Best for | Heavier, two-shift production trimming | Lighter, budget-led cutting |
Choose the hydraulic 29H for consistent clamp force on demanding runs, or compare the electric-clamp Cut-True 29A if budget leads. Keeping blades sharp is part of the cost of ownership - see knives for paper cutters.
About Formax
Formax builds document-finishing and cutting equipment, and the Cut-True guillotine line spans tabletop through programmable production models. Mid-State Litho is an authorized Formax dealer that delivers, installs and services the line.
Choosing a Guillotine Paper Cutter
The first decision is clamp type and cut width. For a 29-inch industrial paper cutter, the electric-clamp Cut-True 29A ($18,995) suits lighter, budget-led work, while the hydraulic-clamp Cut-True 29H on this page holds heavier lifts more consistently for two-shift production trimming; step up to the 31-inch Cut-True 31H ($35,145) when sheet width exceeds the 29-inch class, or down to the compact Cut-True 28A for smaller-format shops. Beyond that, match programmable vs manual back-gauge, side or air tables, and safety systems to your daily volume: the Cut-True 29H is a programmable hydraulic guillotine with a 20.5" cut width, programmable back-gauge and an infrared safety curtain built for production paper cutter duty. Browse related hydraulic guillotine paper cutters and replacement knives and blades, or our bindery and finishing equipment.
Why Buy From Mid-State Litho
- Second-generation, family-owned Michigan dealership founded in June 1984, serving the Great Lakes region.
- Authorized dealer with factory-trained installation, operator training, and in-house service - not a drop-ship box.
- Freight handled and reconciled with the vendor, with lift-gate delivery on equipment.
- Real phone support, factory-backed parts, and financing or trade-in options.
Mid-State Litho handles freight, installs the machine, trains your operators, and services it after the sale. Request a quote and we will scope the right configuration for your shop.
Frequently Asked Questions
What is the cutting width?
The Cut-True 29H has a 20.5" (520mm) cutting width; Mid-State Litho can confirm the exact specification for your application.
Is it programmable?
Yes - the Cut-True 29H is a programmable hydraulic guillotine with a programmable back-gauge for repeatable production cuts.
Does it include safety systems?
Yes - it uses an infrared light-beam safety curtain and two-hand cut activation.
Is it a quote item?
The Cut-True 29H is sold as a quoted system; Mid-State Litho provides pricing, freight, installation and training.
What is the difference between the Cut-True 29A and the 29H?
Both are 29-inch-class Formax guillotine cutters. The 29A uses an electric clamp; the 29H uses a hydraulic clamp, which holds heavier lifts more consistently for production trimming.
Does Mid-State Litho sharpen guillotine cutter knives?
Yes - we offer in-house knife sharpening and stock cutting sticks and replacement knives, serving Michigan and the Great Lakes region.
Can I finance the Cut-True 29H?
Yes - Mid-State Litho offers equipment financing and leasing and accepts trade-ins on older cutters.
Do you sharpen and replace Cut-True 29H knives?
Yes - Mid-State Litho sharpens Cut-True 29H guillotine knives in-house and stocks replacement blades and cutting sticks. See knives for paper cutters to keep your cutter running square.
What is the difference between a hydraulic and electric clamp on a 29-inch cutter?
A hydraulic clamp, like the one on the 29H, applies steady, adjustable pressure that holds heavier lifts consistently for production trimming; an electric clamp, like the one on the Cut-True 29A, is a lower-cost option for lighter work. Both are 29-inch-class Formax cutters.
We deliver it, install it, train your team and keep it running.
This is not a drop-ship. Our factory-trained technicians install on site, train your operators, and back it with same-day and next-day service across Michigan and the Great Lakes.
Install & train
On-site setup and operator training included.
Same / next-day service
Fast response across the Great Lakes.
Precision machining
Replacement parts fabricated in-house.
Financing
Lease and purchase options available.