Standard Horizon APC-450

Standard Horizon APC-450 Programmable Electric Paper Cutter

The Standard Horizon APC-450 is an automatic programmable guillotine paper cutter with a 17.7" (450 mm) cutting width, built for bleed trim work and basic cutting of digitally imprinted stocks. Mid-State Litho is an authorized Standard Horizon dealer, and the APC-450 is the cutter we most often recommend to print shops and in-plant centers that need accurate, repeatable trimming of digital output without stepping up to a full production cutter. Programming and job recall functions handle the day-to-day: the system stores up to 30 jobs with 99 steps each (300 steps total), three quick-access memory buttons recall your most common jobs instantly, and a repeat-cut function simplifies setting up multiple cuts of the same dimension within a job.

Operator safety is designed in. Area sensors stop the cutting motion immediately if any object is detected, and a key is required for operation, so only trained operators run the machine. For accuracy, the standard foot pedal pre-clamps the paper before electrically powered clamp pressure (10 kN automatic) is applied, and the high-speed hardened-steel blade delivers clean cuts cycle after cycle, with automatic push-out moving finished stacks clear of the blade. At a 9-second cut cycle (8 seconds at 60 Hz) and a footprint of about 33" x 36", it fits real production work into a compact floor space on standard single-phase power.

The APC-450 is a Quote-Only machine: pricing depends on configuration, delivery, and installation, so request a quote or call 1-800-343-4231 and our team will spec it for your volume. Compare it with our other electric paper cutters, the larger Standard Horizon APC-610, or the full guillotine paper cutters collection. Equipment financing and leasing is available.

Features

• Easy set-up: Three quick-access memory buttons for instant recall, with job memory up to 30 programs. A repeat-cut function simplifies set-up of multiple cuts of the same dimension within a job.
• Advanced safety features: The APC-450 has been specially designed to maximize operator safety. If the area sensors detect any objects, the cutting motion will stop immediately. A key is also required for operation.
• Precision cutting: The standard foot pedal clamps paper firmly before electrical-powered clamp pressure is applied for increased accuracy. The machine is equipped with a high-speed hardened-steel cutting blade for precise cutting. Automatic push-out is provided for smooth and safe operation.

Technical Specifications

Authorized Standard Horizon Dealer - Why Buy from Mid-State Litho?

Mid-State Litho has been an authorized Standard Horizon dealer since 1984, serving Michigan and the Great Lakes region. Every APC-450 we sell is installed and supported by our own factory-trained service technicians, with in-house knife sharpening to keep your blade cutting clean without long OEM turnaround. We cover Michigan, Ohio, Indiana, and the surrounding region on-site from our Grand Blanc, MI facility, and we stock cutting sticks and consumables. Equipment financing and leasing are available on Standard Horizon machines. Ready for numbers? Request a quote or call 1-800-343-4231, and see our Service & Support page for coverage details.

How to Choose a Standard Horizon Cutter

Mid-State Litho carries four Standard Horizon cutters, all quote-priced and all Active in our lineup. Choose by sheet size and production volume:

• APC-450 (17.7", this page) - the entry automatic in the line. Programmable cutting for digital print and bleed trim work.
• APC-610 (24") - the larger automatic, for bigger sheet sizes and heavier daily volume.
• PC-640 (25.1") - the widest cutter in the Standard Horizon line we carry.
• PC-450 (17.5") - the compact alternative at the small-format end.

If your work is roll-fed or card-based rather than stack cutting, look at the Standard Horizon SmartSlitter, or read about the rise of inkjet print finishing in Michigan on our blog.

Frequently Asked Questions - Standard Horizon APC-450

What is the cut width of the Standard Horizon APC-450?

The Standard Horizon APC-450 has a 17.7-inch (450 mm) maximum cutting width with a maximum cutting height of 2.36 inches (60 mm).

Is the APC-450 automatic?

Yes. The APC-450 is an automatic programmable paper cutter with job recall. It stores up to 30 jobs with 99 steps each, and three quick-access memory buttons recall common jobs instantly.

What is the APC-450 best suited for?

The APC-450 is built for bleed trim work and basic cutting of digitally imprinted stocks. It is a strong fit for print shops and in-plant centers finishing digital output.

How do I get pricing on the APC-450?

The APC-450 is sold on a quote basis. Request a quote from Mid-State Litho, the authorized Standard Horizon dealer for Michigan and the Great Lakes region, by calling 1-800-343-4231 or using our contact form.

Does Mid-State Litho install and service the APC-450?

Yes. Mid-State Litho provides installation, operator training, and on-site service by factory-trained technicians across Michigan and the Great Lakes region, plus in-house knife sharpening.